Barniz 3K Liquid Vinyl in Spray or 3.2 liter Gallons recommended for applying to your car with liquid vinyl.
Barniz 3K with matte or glossy finish. The application of the varnish, in addition to giving shine in the case of the shiny varnish, also protects the liquid vinyl of the car, increasing its longevity.
How to apply the Varnish 3k
To obtain best results, avoid direct sunlight, an environment with more than 50% humidity and a windy environment. Apply at an ambient temperature of 24ºC and humidity below 45% to obtain the best result and finish.
After it is well applied and dry, apply a protective layer over the Liquid Vinyl similar to an acrylic paint. Before proceeding to the definitive application of the 3K barniz, carry out appropriate tests on an alternative surface.
This protective coating resists fuels, is more resistant to scratches and allows you to polish the paintwork. Increases the longevity of Liquid Vinyl to 10 years. Removable whenever applied over 6 layers of Liquid Vinyl and with a glossy or matte finish.
After applying the last layer of Liquid Vinyl, wait at least 24 hours for the solvents to evaporate and dry to the touch. After 24 hours, apply a first thin layer of 3k varnish and wait 8 minutes at a temperature of 24ºC between hands, a total of 3 hands maximum.
Wait at least 3 hours after the last layer for it to dry completely.